boulevard/20-09-08_ansuz
 

A visit to Ansuz, Aavik and Børresen - Part 1

16.12.2020 // Dirk Sommer, Birgit Hammer (Photos)

Michael Børresen explains the advantages of the resonant mode power supply, a rather expensive switching power supply variant that only generates interferences which are easily to be filtered out
Michael Børresen explains the advantages of the resonant mode power supply, a rather expensive switching power supply variant that only generates interferences which are easily to be filtered out

The Aavik 380M power amplifier also uses a resonant mode power supply. Noticeable is the multitude of filter capacitors and the PCB with 50 Active Tesla Coils
The Aavik 380M power amplifier also uses a resonant mode power supply. Noticeable is the multitude of filter capacitors and the PCB with 50 Active Tesla Coils

Aavik's integrated amplifier 380U can be equipped with three modules: PCM converter, DSD converter and phono stage. Of course the configuration can also be changed to i.e. two phono stages and one converter
Aavik's integrated amplifier 380U can be equipped with three modules: PCM converter, DSD converter and phono stage. Of course the configuration can also be changed to i.e. two phono stages and one converter

The phono preamp from the new 180 series: Like the integrated amplifier, the streamer and the DAC, it will retail at 6,000 euros
The phono preamp from the new 180 series: Like the integrated amplifier, the streamer and the DAC, it will retail at 6,000 euros

The electronic section is housed in a shielding metal case with as little aluminum as possible, because Lars Kristensen is firmly convinced that this type of metal results in a bad sound. The models of the 580 series feature copper casings. The exterior consists of a composite material
The electronic section is housed in a shielding metal case with as little aluminum as possible, because Lars Kristensen is firmly convinced that this type of metal results in a bad sound. The models of the 580 series feature copper casings. The exterior consists of a composite material

Next stop is the loudspeaker production. The characteristic flow structure behind the ribbon tweeters is not the only special feature of these exceptional transducers, not to mention their price tags
Next stop is the loudspeaker production. The characteristic flow structure behind the ribbon tweeters is not the only special feature of these exceptional transducers, not to mention their price tags

Lars Kristensen outlines the special features of the motor concept of the Børresen drivers
Lars Kristensen outlines the special features of the motor concept of the Børresen drivers


  • Making Vinyl Europe 2026

    Vor zwei Wochen fand der Making-Vinyl-Congress in der Phil(harmonie) in Haarlem statt, ein „Treffpunkt für Fachleute, die sich mit den treibenden Kräften der Vinylbranche auseinandersetzen – von Marktdynamik und Verbraucherverhalten bis hin zu Fortschritten in Fertigung und Technologie“. Daran nahmen auch die High End Society teil. Die Veranstaltung wendet sich nicht an engagierte Vinyl-Fans, sondern nur an in der Branche Tätige. Zwar braucht man dafür keine Belege oder Nachweise, doch wird der Zugang über die…
    16.10.2026
  • Statements in High Fidelity | Warsaw Edition 2026

    Das Magazin meines Kollegen Wojciech Pacuła, highfidelity.pl, und hifistatement.net zeichneten zu den Messen in München und in Warschau traditionell jeweils eine Komponente aus, die uns im vorausgegangenen Halbjahr begeisterte. Da die High End heuer in Wien stattfand, werden wir ab sofort von der Vienna und der Warsaw Edition der Awards sprechen. Die Wahl des Kollegen fiel auf den Vollverstärker darTZeel Audio CTH-8550 Mk II und er begründete sie so: „Der Klang des darTZeel-Vollverstärkers lässt sich…
    14.10.2026
  • Statements in High Fidelity | Warsaw Edition 2026

    My colleague Wojciech Pacuła’s magazine, highfidelity.pl, and hifistatement.net have traditionally recognised one component at each of the trade fairs in Munich and Warsaw that had impressed us over the previous six months. As High End was taking place in Vienna this year, we will henceforth be referring to the Vienna and Warsaw Edition of the Awards. My colleague chose the integrated amplifier darTZeel Audio CTH-8550 Mk II and explained his choice as follows: “The sound…
    14.10.2026
  • High Fidele Wundertüten

    Manchmal stolpert man ja einfach über etwas oder in etwas hinein, ohne zu wissen, was daraus wird. So geschehen als mein Mann und ich Mitte April im vergangenen Jahr in Erlangen waren, um das Projektorchester Orchester concertare der Universitäten Erlangen und Regensburg in der Heinrich-Lades-Halle aufzunehmen. Wir waren an dem Tag für Aufbau und Soundcheck zu früh dran. Was tun mit der gewonnenen Zeit? Ein bisschen die Umgebung erkunden. So schlenderten wir durch die Haupteinkaufsstraße…
    11.09.2026
  • Chord Electronics neuer Firmensitz

    Tests außergewöhnlicher Komponenten werfen ihren Schatten voraus: Im Umfeld der Beschäftigung mit Chord Electronics' DAVE besuchte mich sein Entwickler in Gröbenzell, ebenso zur Vorstellung des M-Scalers. Die Technik des Maßstäbe setzenden BLU MKII erläuterte mir Rob Watts in Maidstone. Ebendort fand auch das Interview zum Thema Quartet statt. Die Frage, ob wir uns lieber in Gröbenzell oder in Maidstone treffen würden, entschied Mika Dauphin, der Inhaber des deutschen Chord-Vertriebs, recht pragmatisch: Da die englischen Verstärker-…
    24.07.2026
  • Temperatur und Tonabnehmer

    Vor rund 20 Jahren, als noch von Jahrhundertsommern statt von Hitzedomen die Rede war, trieb mich erstmals die Frage um, ob es Tonabnehmersystemen schade, wenn sie oberhalb der üblichen Raumtemperatur benutzt werden. Damals gab Benz-Eigner Albert Lukaschek bereitwillig Auskunft, heuer befragte ich Ortofons ehemaligen Chefentwickler Leif Johannsen. Heute kann man nur neidvoll an die Sommer vergangener Jahrzehnte zurückdenken, als es schon bemerkenswert war, wenn das Thermometer mehrere Tage lang mal mehr als 25 Grad anzeigte.…
    10.07.2026