tests/24-10-08_mk
 
Test.
Deutsch English|

MK Analogue MM-PH-AMP and SUT-1L

13.12.2024 // Dirk Sommer

What distinguishes the Step Up Transformer – or SUP – from MK Analogue from the not really many other representatives of its genre that I have dealt with in more detail are its balanced outputs and inputs. Each channel offers no fewer than two of them: one with a 24-decibel boost and a 1-to-16 transfer ratio and one with a 30-decibel boost and a 1-to-32 ratio. Using two inputs per channel instead of one plus a switch reduces the number of solder joints between the cartridge and the windings and is supposed to improve sound quality. In addition to the six XLR jacks on the back of the SUT-1L, there are two RCA jacks that can accept resistor plugs to adjust the termination impedance. The resistors are in parallel with the transformer's primary windings, so they are merely reducing the load on which the cartridge is operating. Since the current generated by the cartridge no longer runs through the transformer, the volume of the analogue chain is slightly reduced by using the plugs. On the material of the transformer windings and the core, Matej Kelc does not provide any information on his website.

The transformer shows up with RCA plugs for impedance matching. Per channel, two inputs for signal amplification of 24 and 30 decibels respectively are designed as XLR sockets, as are the outputs
The transformer shows up with RCA plugs for impedance matching. Per channel, two inputs for signal amplification of 24 and 30 decibels respectively are designed as XLR sockets, as are the outputs

Matej Kelc places great emphasis on consistently shielding the transformer against electromagnetic interference, resonances and direct sound radiation. The transformer itself is located in a MU metal capsule, which is surrounded by a brass body lined with bitumen mats. The entire aluminum housing is not only lined with additional bitumen mats, but its base plate is also connected to a stainless-steel plate: the sandwich construction serves to further optimize the resonance behaviour. Sorbothane feet decouple the SUT-1L from the ground.

The matching MK Analogue phono stage goes by the self-explanatory name MM-PH-AMP and is therefore designed exclusively for amplifying signals of those strengths provided by moving magnet, moving iron or high-output moving coil pickups and MC transformers. The MM-PH-AMP features a dual-mono design and is powered by an external power supply, which, however, is not designed with separate channels. To achieve the greatest possible homogeneity of the channels, Matej Kelc relies on a common filtering of the voltage, partly performed in the external power supply and partly on the common main board. The total capacity is twice 23,500 microfarads. The passive circuitry comes up with four filter stages and also fulfils the function of an inrush current limiter. Separate voltage regulation for each amplifier section with high damping as close as possible to the load minimizes interference and enhances dynamics.

RIAA equalization is performed purely passively. Ultra-fast MKP film capacitors coated on both sides are used to guarantee extremely high resolution and dynamics. The amplification is assumed by operational amplifiers with a rise time of 150 volts per microsecond and a high bandwidth. The output stage is a class A power amplifier that, with appropriate cooling, is even capable of driving loudspeakers. Longer cables between the MM-PH-AMP and the preamplifier should therefore not pose a problem. Matej Kelc's goal in developing the phono stage was to achieve phase linearity in the audible frequency range. On his website, he explains this decision as follows: ‘The timely correct reproduction of all frequencies in the audible range determines whether a recording is perceived as lively, natural, dynamic, finely resolved, spatial and simply real. If this is the case, we not only listen to the music, we feel it, it moves us emotionally.’


  • Ortofon MC X10

    Der renommierte Tonabnehmer-Hersteller Ortofon implementiert die Gene seiner großen MC-Systeme in die neue Einstiegsserie „X“ und bettet sie in ein innovatives Gesamtkonzept. Wir testen das günstigste Modell MC X10 zum Preis von 300 Euro, das bereits mit technischen Finessen wie um 90 Grad gedrehten Reinsilberspulen aufwartet. Wie sehr liebe ich Ortofon! Es gibt keinen anderen Tonabnehmer-Hersteller, von dem ich im Prinzip jedes Modell blind kaufen würde. Und dies bereits zur Genüge auch getan habe. Der…
    08.07.2025
  • WestminsterLab Lumin Power X1 DC Cable

    Auch wenn dies bereits der fünfte Artikel ist, der Erzeugnisse von WestminsterLab zum Gegenstand hat, ist es der erste, in dem es um ein Kabel geht – und was für eins: ein Gleichstromkabel für die Verbindung von Netzteil zum Hauptgerät eines einzigen Herstellers: Lumin. Noch dazu ist das Kabel in Relation zu den Geräten recht kostspielig. Ich gebe gerne zu, dass ich von allein niemals auf die Idee gekommen wäre, mich mit WestminsterLabs Lumin Power…
    04.07.2025
  • Acousence dac-pre reference UX

    In vielen meiner Tests kommen Produkte von Acousence vor, wenn auch nicht namentlich. Denken Sie nur an Schostakowitschs Symphonie Nr. 15 mit den Duisburger Philharmonikern: ein vorzügliches klingendes Album, egal ob als File oder als LP. Doch Acousence steht nicht nur für Aufnahmen, sondern auch für Hifi- und Studio-Equipment der etwas anderen Art. Der Kopf hinter Acousence – ein Kunstwort aus „acoustics“ und „experience“ – ist Ralf Koschnicke. Er betreibt ein Tonstudio, ist Mitglied im…
    01.07.2025
  • Goldring Ethos SE

    Seit dem Bestehen von hifistatement – und das sind nun auch schon 14 respektive 16 Jahre – testeten wir einen einzigen Goldring-Tonabnehmer: Dabei tauchte das Elektra nur kurz im zweiteiligen Berichts über den Transrotor Crescendo auf. IDC Klaassen, der neue Goldring-Vertrieb, wollte das ändern und schickte das aktuelle Topmodell nach Gröbenzell. Auch wenn es in der Einleitung ein wenig anders erscheint, haben die Kollegen und ich schon durchaus Erfahrungen mit den Systemen oder zumindest den…
    24.06.2025
  • Transparent Audio XL Power Cord

    Als ich kürzlich Luis Fernades und Werner Möhring in Meschede besuchte und wir den Test der Finite Elemente Carbofibre° Statement verabredeten, schlug der Geschäftsführer des G8-&-Friends-Vertriebs vor, auch mal eines der besseren Stromkabel von Tranparent auszuprobieren. Doch wie testet man ein einzelnes Netzkabel in einer gut abgestimmten Kette? In meiner Anlage versorgt fast durchgängig von Garth Powell entwickelte Netztechnik der Marke Audioquest die Komponenten mit Energie. Allerdings ist seit der ungemein aufwendigen Beschäftigung mit den…
    20.06.2025
  • SilentPower Omni LAN

    Welch positive klangliche Auswirkung die Synchronisation mit einer 10-Megahertz-Clock hat, haben Roland Dietl und ich an dieser Stelle schon häufig beschrieben. Allerdings bewegten sich beispielsweise alle dafür geeigneten Switches im gehobenen vierstelligen Preisbereich. SilentPowers Omni LAN hat einen Clock-Eingang und kostet gerade mal 800 Euro. Wer vielleicht durch Wolfgang Kempers Test des SilentPower LAN iPurifiers Pro mitbekommen hat, dass SilentPower eine Untermarke von ifi ist, kann sich gewiss erklären, warum das Omni-LAN-Switch trotz seiner vielfältigen…
    17.06.2025

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.